3 Printer Operation Reset Your Printer
36
3.3 Reset Your Printer
By resetting your printer, you can return your printer to factory defaults. This
can help you solve some problems caused by settings changed when
printing from driver or sending commands.
Perform the following steps to reset your printer:
1. Turn off the printer.
2. Press and hold the FEED button and turn on the printer.
3. Both status lights illuminate solid orange for a few seconds. Next, they
turn to green shortly and then turn to other colors. When both lights
turn to red, release the FEED button immediately.
4. Press and hold the FEED button for 3 seconds and release it. Both status
lights blink red three times, and turn to solid orange for a few seconds.
After the printer is reset, LED 2 goes out while LED 1 turns to solid green.
Important: In step 4, if you do not hold the FEED button long enough,
LED 2 will blink orange three times while LED 1 goes out. It means the
printer is not reset.
To Next Page
Loading...
