SATO WS412DT - Ipv6

6 SATO WS4 Printer Utility Work with SATO WS4 Printer Utility
66
∙ If you are using a dynamic IP
address provided by DHCP, in the IP
Address box, enter the IP address
under Current TCP/IP in the LAN
tab, and then click OK.
Note: When DHCP is enabled and your printer is idle for a long time, the IP
address of your printer may change. Click Get to get the new IP address if you
find the current IP address is not working.
6.2.6 IPv6
The IPv6 tab provides IPv6 settings, including IPv6 and Current IPv6.
Set Up IPv6 Connection
Before you set up IPv6, make sure you have IPv6 connectivity.
1. Do one of the following to configure your IPv6 settings:
• If you have a static IPv6 address, in the Mode list, click MANUAL; in the IP
Address box, enter your IPv6 address, and click Send.