6 SATO WS4 Printer Utility Work with SATO WS4 Printer Utility
71
∙ If you’re using WPA-Personal or WPA2 Personal, enter your password in the
WPA Pre-Shared Key box.
∙ If you’re using 802.1X, WPA-Enterprise or WPA2 Enterprise, choose your EAP
authentication method in the EAP Method list, and enter your username and
password in EAP User Name and EAP Password boxes respectively. If you’re
using TTLS mode, you can choose the TTLS encryption method from the TTLS
Method list.
4. Do one of the following to configure your IPv4 settings:
∙ If you have a static IP address, fill the IP Address, Subnet Mask and Gateway
box under IPv4 according to your network settings, make sure DHCP is disabled
and click Send.
To Next Page
Loading...
