Crane and lifting gear
Crane and appropriate lifting gear (e. g. chains, cross beam) with sufficient
load bearing capacity.
Measuring beaker
Measuring beaker for measuring out operating materials, e.g. oil.
Oil injector
Oil injector for feeding in small quantities of operating materials, e.g. preser-
vation oil.
Preservation oil
In line with the specifications in the oil recommendations for Sauer-Compres-
sors.
Specification Tightening torque
Connecting rod bolts 90 Nm
Cylinder foot nuts 175 Nm
Hexagon head screws for valve
cover of compression
stages 1, 2 and 3
115 Nm
Hexagon head screws for valve
cover of compression stage 4
250 Nm
Socket head cap screws on the
cooler
110 Nm
Safety valve for compression
stage 1, 2 , 3 and 4
160 Nm
Bursting disc flange screws 75 Nm
Sacrificial zinc anodes 150 Nm
3.3 Ordering spare parts
Order the Sauer spare parts or Sauer maintenance kits required for the
maintenance work from Sauer-Service. Specify the following information in
the order:
n Part number
The part number for Sauer spare parts can be found in the spare parts
catalogue.
n Main specifications of the Sauer‑Compressor
The main specifications for the Sauer‑Compressor are shown on the
nameplate.
n Number of operating hours
Required tools:
Required material:
Table of tightening tor-
ques
10 | WP5000 Basic WA 41013675 en GB 20190916
To Next Page
Loading...
