3 Preparing for maintenance
This chapter summarises the general preparations that are necessary before
any maintenance work.
3.1 Installation conditions
The following conditions must be met:
n The installation location must be dry and free from dust.
n Ensure that the installation location is ventilated in such a way that the
heat generated during operation can be extracted.
n The room temperature must be within the range defined in the technical
data. ÄOperating Instructions, "Technical data" chapter
n The Sauer-Compressor must be easily accessible at all times.
3.2 Requirements for maintenance work
Service personnel
Personnel authorised to service the compressor must be trained technical
specialists employed by the operator and the manufacturer.
Hearing protection
Wear protective equipment to protect the hearing against damage, predomi-
nantly caused by excessively loud noises.
Protective gloves
Wear protective gloves.
Safety boots
Wear safety boots.
Safety goggles
Wear protective equipment to protect the eyes against harmful influences.
Work clothing
Wear clothing to prevent against harmful influences.
Personnel qualification:
Required personal pro-
tective equipment
PREPARING FOR MAINTENANCE
WP5000 Basic WA 41013675 en GB 20190916 | 9
To Next Page
Loading...
