Fig. 17: Servicing the solenoid drain valve
1 Hexagon nut
2 Coil
3 Solenoid armature tube
4 Solenoid armature upper part
5 Solenoid armature spring
6 Spring washer
7 Solenoid armature lower part
8 O-ring
9 Hexagon head screws
10 Washers
11 Housing upper part
12 Membrane springs
13 Membrane socket
14 Diaphragm
15 Housing lower part O-ring
16 Housing lower part
NOTICE!
Cleaning the sealing surfaces
Leaks can lead to damage or can impair correct functioning
of the compressed air system.
– Carefully remove any gasket residue with an appropriate
tool.
– Clean the sealing surfaces carefully before fitting new
gaskets or o-rings.
46 | WP5000 Basic WA 41013675 en GB 20190916
To Next Page
Loading...
