SawStop RT-TGP - Product Specifications; Benchtop Stand Specifications; 27 x 16 Cast Iron Router Table Specifications; 27 Fence Assembly Specifications

1
RT-TGP/RT-BT OWNER’S MANUAL
PRODUCT SPECIFICATIONS
27” x 16” Cast Iron Router Table
Cast Iron Table 27” x 16”
Maximum Fence Travel 5 ½”
Front T-Slot to Arbor Center 6 ½”
Width of Front T-Slot
½” at top,
3
⁄
8
” at bottom
Rear T-Slot to Arbor Center 5”
Width of Rear T-Slot
1” at top,
¾” at bottom
27” Fence Assembly
Length 30 ¾”
Height 3 ½”
Depth 4”
Benchtop Stand
Stand Height (Without Table) 14 ½”
Stand Footprint (Without Table) 23” (Front) x 15 ½” (Side)
The 27” x 16” Cast Iron Router Table is compatible with the Benchtop Stand,
the Professional Cabinet Saw, and the Contractor Saw with cast iron wings.