SawStop RT-TGP - In-Line Left of Left Wing Configuration (PCS or CNS)

3
RT-TGP/RT-BT OWNER’S MANUAL
In-Line Left of Left Wing (PCS or CNS)
Option 2 of 4
This conguration extends the table surface of your SawStop table saw, maintains the
existing table to the right of the blade, and includes:
• 27” x 16” Cast Iron Router Table (RT-C27)
• Support Legs (RT-ST2)
• Power Switch (RT-PSW)
Professional Cabinet Saw (PCS) Contractor Saw (CNS)
The 27” x 16” Cast Iron Router Table is only compatible with the SawStop
Contractor Saw if cast iron wings are installed.
The standard stamped wings on the Contractor Saw cannot support the
weight of the 27” x 16” cast iron router table.
i
stamped
wing