SawStop RT-TGP - Assembly Configurations; Benchtop Stand Configuration

2
RT-TGP/RT-BT OWNER’S MANUAL
ASSEMBLY OPTIONS
PAGES:
2-4
Benchtop Stand
Option 1 of 4
The 27” x 16” Cast Iron Router Table can be mounted to the Benchtop Stand or to your
SawStop table saw in any of four different congurations depending on your needs.
The 27” Fence Assembly for Router Tables is compatible with all four congurations.
This conguration maximizes the portability and placement exibility of your
router assembly.
The picture shows the Benchtop
Stand for Router Table (RT-STB) with
the 27” x 16” Cast Iron Router Table
(RT-C27).