Saia-Burgess Controls AG
User Manual Standby System │ Document 27-645 │ Edition ENG 02 │ 2017-04-26
Diagnostic
2-13
2
Secondary device symbol le name
the media to be transferred between CPU0 and CPU1 of the Secondary device.
The default name is “ToRedSymbolsSecondary”.
Redundant Device (CPU1)
This represents CPU1 in both the primary and the secondary PCD3.M6880
devices. It runs the same program in both devices. This program is the process
which has redundancy.
Redundant device name
The name of the CPU1 device in the PG5. This device’s program is loaded into
CPU1 of the primary and the secondary devices.
Redundant device symbol le name
between CPU1 and CPU0 of the primary and the secondary devices. For “Sin-
Set Defaults button
-
vice to the project.
OK button
When OK is pressed, Project Manager checks for the presence of the Primary,
missing, Project Manager will ask if you want to create them:
will not rename them automatically.
from a backup, or import them an existing project.
To Next Page
Loading...