27
1. LOCK MENU
To prevent from changing modes unintentionally, you can disable the MODE key by setting this function to on in
LOCK_MENU. To change a mode, at first make the Mode Lock function OFF. To set to an ON/OFF, moves to a
level using UP/DOWN key then press START key to enter or directly press a numeric key.
To prevent from changing CF function unintentionally, you can disable the CF key by setting this function to on
in LOCK_MENU. While this function is ON, the CF key cannot work. To set to ON/OFF, moves to a level using
UP/DOWN key then press START key to enter or directly press a numeric key.
2. BEEP
If beep function is set to “ON”, an audible beep tone will be generated when a key is pressed, otherwise it will
not be generated. To set to ON/OFF, moves to a level using UP/DOWN key then press START key to enter or
directly press a numeric key.
3. RESULT CLEAR
If ‘Result Clear’ is turned On, counted value displayed on the external display (provided as an option) is
automatically cleared after 10 seconds
To set to ON/OFF, moves to a level using UP/DOWN key then press START key to enter or directly press a
numeric key.
To Next Page
Loading...
