Need help?Do you have a question about the Scaime eNod4-C and is the answer not in the manual?
General| Category | Transmitter |
|---|---|
| Manufacturer | Scaime |
| Model | eNod4-C |
| Power Supply | 10-30 VDC |
| Operating Temperature | -10°C to +50°C |
| Protection Class | IP20 |
| Load cell excitation | 5 VDC |
| Number of Channels | 1 |
| Excitation voltage | 5 VDC |
| Communication Interface | RS485 |
| Protocols | Modbus RTU |
| Input Signal | Load cell |
| Output signal | Digital |
Initial steps for using the product, safety warnings, and protection guidelines.
Overview of eNod4 transmitter's capabilities, features, and available versions.
Information on the configuration software for eNod devices.
Technical drawings showing product dimensions for different models.
Electrical, communication, and metrological specifications of the eNod4 product.
Specifications for legal for trade certification, including OIML and sealing.
General guidelines for wiring to prevent ESD and EMI disturbances.
Power, load-cell, IO+ version, JB4 option, and 220V option connection details.
Connecting RS485, CAN, and Profibus interfaces with pin details and EOL impedance.
Selecting communication addresses and baud rates for various interfaces.
Overview of communication protocols and simultaneous functioning modes.
Physical, theoretical, coefficient, gravity, and scale interval adjustments.
Details on A/D conversion, Bessel, Notch, and Self-adaptive filters.
Gross, Net, Tare values, preset tare, and measurement status information.
Global and sensor input diagnosis for measurement chain integrity.
Determining object weight on a conveyor belt and providing results.
Dynamic zero calculation and automatic zero tracking features.
Assigning inputs to functions and descriptions of input functions.
Assigning functions to outputs and detailed descriptions of output functions.
Startup screens, connection status, and multi-eNod display.
Main display, keyboard layout, and key functions in checkweigher mode.
Navigating setup menu, parameters, I/O, and overall configuration.
Parameters for checkweigher mode, including dynamic zero and trigger settings.
Setting target weight and acceptable tolerance ranges for checkweigher results.
To Next Page
