Scaime eNod4-C - Result Displaying and Storage (Enod4-C, Enod4-D)

49
SCAIME Manual : NU-eNod4C-E-0418-196712-F.docx
NOTES:
- Sensor input reference must be performed before using the sensor input control functionality, see Sensor Input
control Parameters menu in the Configuration Setup chapter.
- When you press the HR key, the High-Resolution net weight expressed in tenth of the user weight unit is
displayed during 5 seconds. This may be used for weighing system metrological qualification.
12.1.4 Result displaying and storage (eNod4-C, eNod4-D)
• The Result screen can be displayed from the main screen with
key
• The Result screen shows information related to the result of checkweighing cycle (eNod4-C) or Dosing cycle
(eNod4-D): Last result value and statistics (Number of cycle (n), Result standard deviation (δ) and result average
(µ)).
• From this screen, it is also possible to record up to 1000 results with the possibility to transfer these stored
results on USB key in .CSV format.
Logical inputs
Logical output
Net weight
Sensor input
control result
Run the sensor
input control
command
Display of the High-
Resolution net weight
(on legal for trade
certified version)
Clear statistics
Recorder control
Recorder indicators
Recorder stopped
Recorder running