Scaime eNod4-C - Page 42

42
SCAIME Manual : NU-eNod4C-E-0418-196712-F.docx
• By default the eNod number is 1, eNodTouch starts on the main screen of the first eNod.
• Increase eNod number if needed. The display module can start on the main screen of any eNod or on the multi-
eNod screen by disabling « Starting eNod » function.
• If starting eNod is disconnected or have communication problems, the multi-eNod screen appears.
• When settings are finished, touch the left arrow button, to restart eNod Touch.
• According to the number of eNod settled, eNodTouch redirects to the following multi-eNod screens:
Channel name
Weight value
Unit
Gross/Net
Indicator
Multi eNod (2 eNod)
Multi eNod (3 eNod)
Multi eNod (4 eNod)
Multi eNod (5 eNod)