Scaiola ERGE BT - Page 32

32
DATI TECNICI
MITHRA M - POS 69 x 72 x 187 h
Kg. 184
+2° + 10° + 30 70 % Ventilata 230 V - 50 Hz 420
MITHRA S - POS 69 x 72 x 128 h
Kg. 150
+2° + 10° + 30 70 % Ventilata 230 V - 50 Hz 420
MITHRA L - POS 89 x 72 x 187 h
Kg. 218
+2° + 10° + 30 70 % Ventilata 230 V - 50 Hz 420
MITHRA SL - POS 89 x 72 x 128 h
Kg. 180
+2° + 10° + 30 70 % Ventilata 230 V - 50 Hz 420
MITHRA M - BT 69 x 72 x 187 h Kg. 183
-10° - 21° + 30 70 % Ventilata 230 V - 50 Hz 570
MITHRA S - BT 69 x 72 x 128 h Kg. 150
-10° - 21° + 30 70 % Ventilata 230 V - 50 Hz 570
MITHRA L - BT 89 x 72 x 187 h Kg. 216
-10° - 21° + 30 70 % Ventilata 230 V - 50 Hz 600
MITHRA SL - BT 89 x 72 x 128 h Kg. 180
-10° - 21° + 30 70 % Ventilata 230 V - 50 Hz 600
MITHRA M - BTV 69 x 72 x 187 h Kg. 208
+5° - 21° + 30 70 % Ventilata 230 V - 50 Hz 570
MITHRA S - BTV 69 x 72 x 128 h Kg. 150
+5° - 21° + 30 70 % Ventilata 230 V - 50 Hz 570
MITHRA L - BTV 89 x 72 x 187 h Kg. 241
+5° - 21° + 30 70 % Ventilata 230 V - 50 Hz 600
MITHRA SL - BTV 89 x 72 x 128 h Kg. 180
+5° - 21° + 30 70 % Ventilata 230 V - 50 Hz 600
TERMOSTATO TOUCH KDT
STAND-BY (ON/OFF)
Press for >5 seconds. Activate
the Stand-by function (ON/OFF)
Press briey Switches
light on/off
LIGHT
Press briey Starts/stops
rotation
SISTEMA GIREVOLE
- Long press of “SET”. After the beep, short pressure for 2 times “SET”
- The temperature set will appear on the display. When the degrees symbol (C°) ashes,
you can change the value set by pressing buttons
- Short pressure for 2 time to conrm “ESC”.
INSTRUCTIONS FOR SETTING TEMPERATURE
8.1
8.2