Scale House ASB6 - 1. INTRODUCTION; 2. MAIN TECHNICAL SPECIFICATIONS; 3. INSTALLATION

4
1. INTRODUCTION
This manual was created to help you install and learn all about the functional possibilities of the ASB scale.
WARNINGS
The scales should be sited in a location that will not degrade the accuracy.
Avoid extremes of temperature. Do not place in direct sunlight or near air conditioning vents.
Avoid unsuitable tables. The tables or floor must be rigid and not vibrate. Do not place near vibrating machinery.
Avoid unstable power sources. Do not use near large users of electricity such as welding equipment or large motors.
Avoid high humidity that might cause condensation. Avoid direct contact with water. Do not spray or immerse the scales in
water.
Avoid air movement such as from fans or opening doors. Do not place near open windows.
Keep the scales clean.
Do not stack material on the scales when they are not in use.
2. MAIN TECHNICAL SPECIFICATIONS
Model
Plate
(dimensions in mm)
Capacity kg
Division g
ASB6
230x300
3/6
1/2
ASB15
230x300
6/15
2/5
ASB30
230x300
15/30
5/10
ASBP6
230x300
3/6
1/2
ASBP15
230x300
6/15
2/5
ASBP30
230x300
15/30
5/10
◆ 6 Large LCD displays.
◆ Rechargeable battery.
◆ Selectable price unit (kg or hg).
◆ Accumulate operation.
◆ Account function, do memory recall, give change and memory clear one time.
◆ Auto backlight.
3. INSTALLATION
a) Unpack then product.
b) If present (depending on the model), it is necessary to unscrew and remove the locking screw for the transportation
placed under the scale, as shown in the figure below: