Scale House ASB6 - 6.7 Unit Price Memory; 6.9 Printing and Totalisation; 6.10 Total and Account Operation

9
the total price of the goods. To cancel the previous unit price, press CANCEL key.
6.7 UNIT PRICE MEMORY
The scale can store 10 sets unit price.
6.7.1 SAVE THE UNIT PRICE
Hold the PLU key for 3 seconds after you key in the unit price, it will show “SAVE PoS 00” , press numeric
key 0~9 to select which memory location you want to use. After you do, the unit price is stored in the scale.
6.7.2 LOAD THE UNIT PRICE
If you want to use the unit price stored in the scale, press PLU key, the scale will shows “LoAd PoS 00”,
press numeric key 0~9 to select which memory location’s price you want to use, current unit price will change to
the value stored in the memory.
6.8 AUTOMATIC UNIT PRICE CLEAR
The scale can set automatic unit price clear, when return to zero, the scale will clear the unit price automatically.
Press SAVE key will turn on / off automatic unit price clear function, when SAVE indicator on, automatic unit price
clear disable, when SAVE indicator off, automatic unit price clear enable.
6.9 PRINTING AND TOTALISATION OF THE AMOUNT
The scale can be set to manually print the weight and amount data on printer and accumulate the amount (see F13
step, section 7).
NOTE: With approved instrument the amount accumulation is allowed only with the presence of the printer; if the
system is without the printer, the accumulation function is disabled in the F13 step and the step can not be modified.
6.9.1 PREPARE TO PRINT AND ACCUMULATE
Each time before printing, please make sure the platter is empty, the current accumulator values is reset to zero,
and the weight reading is stable.
6.9.2 PRINTING AND TOTALISATION
Put the weighing item on platter, wait for the weight reading to be stable, press the M+ key, the weight and
amount data will be printed: the first display will show “total” during the third display shows the total amount, and
the weight and amount data will be printed.
6.9.3 NOTES
- The printing functions with a minimum weight of 20d.
- The maximum total amount value which may be accumulated is 999999. Once reached these limits, one
should clear the total.
- The total values will be cleared when it’s turned off.
6.10 TOTAL AND ACCOUNT OPERATION
After do accumulate operates, it is possible to visualize the total amount on the first display, by pressing the account
key.
In this visualization it is possible to:
- key in the paid money by keyboard, that will be shown on the second display, and show on the third display the
return value.
- print the total amount by pressing the M+ key.
To return normal weighing mode:
- press ZERO key if you don’t want clear memory or
- press TARE key, to clear also the memory.
Note: if you haven’t do accumulate operation, you also can use Account function, the summed price is current total