4
2. SAFETY RULES
Warning: Failure to follow these rules may result in serious personal injury.
As with all machinery there are certain hazards involved with operation and use of the
machine. Using the machine with respect and caution will considerably lessen the
possibility of personal injury. However, if normal safety precautions are overlooked or
ignored, personal injury to the operator may result.
This machine was designed for certain applications only. We strongly recommend that
this machine will not be modified and/or used for any application other than for which it
was designed. If you have any questions relative to its application DO NOT use the
machine until you have contacted us and we have advised you.
Safety rules for all tools
A. User
1. Wear Proper apparel. No loose clothing, gloves, rings, bracelets, or other jewellery to
get caught in moving parts. Non slip foot wear is recommended. Wear protective hair
covering to protect long hair.
2. Always wear eye protection. Also use face or dust mask if cutting operation is dusty.
3. Don’t overreach. Keep proper footing and balance at all times.
4. Never stand on tool. Serious injury could occur if the tool is tilted or if the cutting tool
is accidentally contacted.
5. Never leave tool running unattended. Turn power off. Don’t leave tool until it comes
to a complete stop.
6. Drugs, Alcohol, Medication. Do not operate tool while under the influence of drug,
alcohol or any medication.
B. Use of Machine
1. Don’t force tool. It will do the job better and be safer at the rate for which it was
designed.
2. Use right tool. Don’t force tool or attachment to do a job for which it was not
designed.
3. Secure work. Use clamps or a vise to hold work when practical. It’s safer than using
your hand and frees both hands to operate tool.
4. Use recommended accessories. Consult the owner’s manual for recommended
accessories. The use of improper accessories may cause hazards.
5. Avoid accidental starting. Make sure switch is in “OFF” position before plugging in
power cord.
C. Adjustment
1. Make all adjustments with the power off. The user should read the detailed
instruction in this manual when making adjustments and assembling the machine.
D. Working Environment
1. Keep work area clean. Cluttered areas and benches invite accidents.
To Next Page
Loading...
