To Next PageTo Next Page
Need help?Do you have a question about the ScentAir ScentWave and is the answer not in the manual?
Set the scent intensity using one of seven levels for desired fragrance output.
Control fragrance coverage area by adjusting fan speed clockwise or counterclockwise.
Schedule the system to run at specific times and days of the week, up to six events.
Place the unit where guests first enter, in high traffic areas, or in airflow paths for optimal scent diffusion.
Do not place near exhaust vents, open windows, or HVAC return grills to ensure effectiveness.
Connect the ScentWave cartridge cord, insert, and lock it before connecting the power supply.
Shows current status like ON/OFF, Scent Level, and fan operation with a circle around ON.
Six buttons control system functions; some have alternate functions when held down.
Switch the unit off by holding the CHECK button; any button wakes the system.
Use the '-' or '+' buttons to select one of seven fragrance intensity levels.
Turn the knob clockwise for faster speeds and wider coverage, counterclockwise for slower, closer coverage.
Default mode, indicating the system is operating under a preset schedule.
Temporarily stops the system during an active event or skips the next scheduled event.
Activates the system immediately or extends an active event beyond its scheduled off time.
Program On Time, Off Time, and Day Combinations for up to six scheduled Scent Events.
Review programmed events; Event 1 cannot be deleted. Delete other events by holding the CLOCK button.
Adjust hour, minute, year, month, and day using the CLOCK, NEXT DIGIT, and +/- buttons.
Enable or disable DST to automatically adjust the clock forward or backward by one hour.
Lock the system by holding NEXT DIGIT and entering '4321' to prevent unintended changes.
Unlock the system by pressing NEXT DIGIT and entering the universal unlock code '4321'.
Instructions for attaching the ScentWave to a wall using the arm mounting kit and provided hardware.
Steps to mount the ScentWave to a flat surface using screws and anchors based on a template.
Guide to mounting the ScentWave 1004 using an arm mounting kit and mounting plate.
Instructions for attaching the ScentWave 1004 to a flat surface using a wall mounting plate.
General
