Operation
3. Press the desired product button.
The LED next to the pressed button illuminates.
4. If you do not want to dispense any other products on this level, press the prod-
uct button assigned to the [Shift] button to return to level 1.
5. Do not remove the cup before the LED next to the product button is switched
off.
4.4.5 Preparing – Espresso and hot water
Danger!
The beverages delivered by the espresso machine are hot! To protect yourself
against scalding, keep hands and other body parts away from the outlet area
during the preparation and delivery of beverages.
1. Put the cup underneath the outlet.
2. Press the desired product key.
The key you have selected lights up green. The following message appears on
the display:
select beverage
choice .. supply ..
select beverage
choice .. supply ..
3. The whole production process is now being done completely automatically.
4.4.6 Preparing - Steam
Note:
For steam delivery press the [ STEAM ] button. The steam is delivered through the
steam pipe located to the left of the beverage outlet.
The steam output can be cancelled by pressing the [ STEAM ] button again.
• Steam cannot be pre-selected.
• Steam can be delivered together with espresso beverages or hot water.
Danger!
Keep away from underneath the steam pipe while steam is delivered! Hold the
container in such a way that no liquid is spilled onto your hands or other body
parts during heating!
The steam pipe is hot. Touch the steam pipe only at the rubber handle.
1. Point the steam pipe towards the drip grid. Press the [ STEAM ] button twice in
short sequence to clean the inside of the steam pipe.
2. Immerse the steam pipe in the beverage as deeply as possible.
3. Press the [ STEAM ] Button.
Steam will be discharged.
The following message is displayed:
select beverage
choice .. supply ..
ª
BASO-1 SUSA - 02.04 - V02 Page 4-5
To Next Page
Loading...
Need help?
General
