Seite 13
Choose electronic functions as described in chapter 3.5
Push blue pushbutton 2 in order to start the automatic operation.
The food product is pushed against the blade by its own weight (gravity).
The carriage is moved automatically
In order to stop the slicing procedure push yellow pushbutton 1
After having finished the slicing procedure turn thickness knob to zero.
Switch off the machine at the red main switch.
Attention! Never try to load the carriage while it is moving
automatically. Always switch off the machine first, otherwise
there is a risk to get injured!!
4. Cleaning
Before initial operation and after a longer period of standstill the machine has to
be cleaned carefully.
With permanent use of the machine you have to clean it at least one time per
day or if necessary also a few times per day. For cleaning proceed as follows:
Risk of getting hurt!
Be careful when cleaning the machine. Especially in the area of the
knife there is a risk of injury. Always work with concentration, do not
let distract yourself from your work.
4.1. How to proceed with cleaning
Switch off the machine at the red main switch.
Adjust machine to manual operation
Pull off the plug.
Close the thickness plate completely by turning the thickness knob to the left.
Remove the weighing tray
Lift the weighing tray upwards.
Remove end piece holder plate
Pull the carriage to the front.
Loosen the star knob of the end piece holder plate
Take off end piece holder plate
Tilt carriage aside
Loosen the star knob of the carriage.
Pull the carriage to the utmost front position.
Tilt the carriage aside.
The carriage cannot be tilted aside in case the thickness plate is
still opened or the machine has not been adjusted to manual
operation.
Always tilt the carriage with care, do not use force!
Remove blade guard
Loosen the star knob and hold the blade guard with the other hand.
By pushing against the star knob the blade guard is tipped against your hand
and you can take the blade guard off.
For cleaning only use usual washing-up liquids. Do not use scratching
or scouring cleansing agents or devices.
To Next Page
Loading...
