Seite 2
Contents
1. GENERAL INFORMATION 3!
1.1. NOTES REGARDING THE OPERATING INSTRUCTIONS 3!
1.2. NOTES REGARDING WARRANTY 3!
1.3. NOTES REGARDING SECURITY 3!
1.4. DESCRIPTION OF THE MACHINE 5!
1.5. USAGE 6!
1.6. GENERAL PLAN OF THE MACHINE 7!
1.7. DIMENSIONS OF THE MACHINE AND TECHNICAL DATA 7!
2. INSTALLATION AND INITIAL OPERATION 8
2.1. CHECKING THE CONTENTS OF THE CARTON 8!
2.2. INSTALLATION 8!
2.3. ELECTRICAL INSTALLATION 8!
2.4. CHECKING THE DIRECTION OF BLADE ROTATION 8!
3. OPERATION 8
3.1. IMPORTANT NOTES BEFORE SWITCHING ON THE MACHINE 8!
3.2. SWITCH FUNCTIONS (MAIN SWITCH WITH SIGNAL LAMP) 9!
3.3. THICKNESS OF SLICES 9!
3.4. AUTOMATIC OR MANUAL MOVEMENT OF THE CARRIAGE 9!
3.5. ELECTRONIC CONTROL 9!
3.5.1. ADJUSTING THE SLICING FUNCTIONS 10!
3.5.1.1. Adjusting the number of slices Modell G330D / G350D 10!
3.5.2. ADJUSTING THE SCALE FUNCTIONS FOR MODEL G330DW /G350DW 10!
3.5.2.1. Switching between slice counter and scale 10!
3.6. OPERATION 11!
3.7. VARIABLE SLICING LENGTH 12!
3.8. SLICING OF END PIECES 12!
3.9. SLICING END PIECES 12!
4. CLEANING 13
4.1. HOW TO PROCEED WITH CLEANING 13!
4.2. CLEANING THE SINGLE PARTS 14!
4.3. CLEANING THE BLADE 14!
4.4. REASSEMBLING THE PARTS 14!
5. SHARPENING THE BLADE 15
5.1. SHARPENING DEVICE 15!
5.2. HOW TO PROCEED FOR SHARPENING 15!
5.3. SHARPENING THE BLADE 16!
5.4. REMOVE SHARPENING DEVICE 16!
6. MAINTENANCE AND CLEANING 16
7. TROUBLE SHOOTING 17
8. WASTE DISPOSAL 17
To Next Page
Loading...
