Seite 17
Take off the blade guard and lubricate the threaded bushing, the adapter, and the
fixing screw of the blade guard.
Lubricate the thread of the star knob at the bottom of the carriage arm.
7. Trouble Shooting
Trouble Solution
grinding noise blade guard has not been mounted correctly
loosen blade guard, mount it again and fix it
blade guard is dirty
clean as described in chapter 4.
machine stops automatically short-term voltage drop, switch on the machine again
LED is not illuminated fuse for electronic control is defective, install new fuse
(only for 110V execution)
machine is getting warm wall socket and plug have to be checked by an electrician
8. Waste disposal
The producer is obliged to take back the machine for waste disposal. For this purpose the machine can be
returned to the manufacturer free of charge.
To Previous Page
Loading...
