www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
GB
|
27
1. Introduction
Manufacturer:
scheppach
Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer,
and success.
Note:
the product that occurs due to:
• Improper handling,
• Non-compliance of the operating instructions,
•
technicians,
• Installation and replacement of non-original spare
parts,
•
•
due to the non-compliance of the electric regulations
and VDE regulations 0100, DIN 57113 / VDE0113.
We recommend:
Read through the complete text in the operating
instructions before installing and commissioning the
device. The operating instructions are intended to
help the user to become familiar with the machine
and take advantage of its application possibilities
in accordance with the recommendations. The
operating instructions contain important information
repairs, reduce downtimes and how to increase
instructions package with the machine at all times
and store it in a plastic cover to protect it from dirt
and moisture. Read the instruction manual each time
operation of the machine and who are informed
about the associated dangers. The minimum age
requirement must be complied with.
recognized technical rules concerning the operation
of woodworking machines.
accidents which arise due to a failure to follow these
2. Layout (Fig. 1-4)
1. Rear grip
2. Front grip
3.
4. Saw chain
5.
6. Guide bar cover
7. Guide bar
8.
9. Power cable
10. Claw stop
11.
12. Cable hook
13. ON/OFF switch
14. Oil tank cap
15. Oil gauge
16. Chain wheel
17. Guide bolt
18. Operation indicator
3. Scope of delivery
• Open the packaging and remove the device care-
• Remove the packaging material as well as the
packaging and transport bracing (if available).
•
•
damage.
•
period has expired.
Attention
• 1 Electrical chainsaw
• 1 Manual
• 1 chain
• 1 bar
• 1 bar sheath
To Next Page
Loading...
Need help?
General
