Why is the saw cut rough or wavy with my Scheppach HM140L Saw?
If the saw cut is rough or wavy when using your Scheppach Saw, it may be due to a dull saw blade or a tooth shape that isn't appropriate for the material thickness. To resolve this, try re-sharpening the saw blade or using a more suitable blade.
How to prevent Scheppach HM140L Saw motor from overheating?
To prevent the Scheppach Saw motor from overheating, avoid overloading it during cutting tasks. Additionally, ensure optimal cooling by removing any dust that may have accumulated on the motor.
Guidelines for maintaining a safe and organized work environment.
Instructions to prevent electric shock and ensure safe power connections.
Recommendations for personal protective equipment and safe operating practices.
Specific safety precautions for operating mitre saws.
Highlights potential hazards that remain even with proper use.
Detailed instructions for safely replacing the saw blade.
General| Input power | 2000 W |
|---|---|
| Power source | AC |
| AC input voltage | 230 - 240 V |
| AC input frequency | 50 Hz |
| Saw blade included | Yes |
| Number of blade teeth | 48 |
| Idle speed (max) | 7000 RPM |
| Bevel type | Double bevel |
Weight and Dimensions| Depth | 750 mm |
|---|---|
| Width | 590 mm |
| Height | 500 mm |
| Weight | 21030 g |
| Package weight | 25660 g |
To Next Page