30 B1051302 Rev. B CDR Wireless Installation
Index
A
Antenna / Receiver
Dental Lamp Pole Mounting, 24
Picture of Base, 25
Picture of Protective Panel, 23
Surface Mounting, 27
Suspended Ceiling Mounting, 27
Symbol on, 21
Wall Mounting, 24
Antenna / Receiver Positioning
Picture of, 22
Attaching Antenna / Receiver Mounting Adapter
Picture of, 26
B
Battery
Removing Pack from Sensor, 10
Securing Pack to Sensor, 13
F
Final Check
Wireless System Upgrade, 8
Final Checks
New Wireless System Installation, 6
Firmware
Installation for Upgrade Wireless Users, 7
M
Mounting Option
Alternate, 28
Docked USB Interface and Antenna /
Receiver, 21
Undocked USB Interface and Antenna /
Receiver, 22
Undocking Units for Remote Positioning, 23
N
New Installation Flowchart, 2
New System Installation, 5
O
Overview, 1
New System Installation, 2
System, 1
Upgrade Installation, 3
Welcome, 1
P
Placing Sensor in Sensor Cradle
Picture of, 11
Protective Panel
Antenna / Receiver Picture of, 23
USB Interface Picture of, 23
R
RF Environment Test, 17
Picture of, 17
RF Noise
Checking for, 6, 8
S
Setup
Wireless Sensor, 9
Software
Installation for New Wireless User, 5
Installation for Upgrade Wireless User, 7
Preparing to Install, 5, 7
T
Terms Used in this Document
Explanation of, 4
U
Upgrade Installation Flowchart, 3
Upgrade System Installation, 7
USB Interface
Picture of Base, 25
Picture of Protective Panel, 23
Wall or Surface Mounting, 24
USB Interface and Remote Module
Positioning, 21
USB Test Pattern
Picture of, 29
W
Wireless Sensor
Loading Calibration File, 6
Positioning, 12
Preparing, 9
Setup and Turn on, 9
Turning on, 12
Wireless System
Important Setup Reminders, 4
To Next Page
Loading...
