Schindler 6300 - Page 102

Schindler 3100/3300/6300 J 43402603 / 01 102/269
Copyright © 2017 INVENTIO AG
0038
ELEVATOR ECU HEARTBEAT MISSING
The car user interface node (COP) has recognized a lost of communication to
the elevator main control. Note: This error mainly occurs together with other
errors. Please check message log first for other reported errors.
C1:COP disconnected
A1:Connect COP
C2:Data transmission faulty
A2:Check data line connection (CAN). Check for correct data line
termination (termination switch in ECU or control cabinet, termination in
ACVF)
C3:Mismatch of car node software and elevator main controller software
A3:Update the software accordingly
0062
ELEVATOR BACKUP BAT SUFFICIENT CHARGE
This informative error message indicates the charge of the elevator backup
battery has resumed to the required minimum level.
C1:
A1:No action required
0063
ELEVATOR BACKUP BAT INSUFFICIENT CHARGE
The charge of the elevator backup battery has fallen below the required
minimum level or was not able to get recharged to the required minimum level
after elevator mains power up.
C1:Battery connection missing or bad
A1:Check connections of the battery
C2:Battery faulty (for example, old)
A2:Replace battery
C3:Battery charging problem
A3:Check wiring to charging device. Check function of charging device
(charging voltage, fuses).
0072
ELEVATOR BACKUP BAT CAR INSUFFICIENT CHARGE
The charge of the car backup battery (for example, used to power the car
backup light) has fallen below the required minimum level or wasn't able to get
recharged to the required minimum level after elevator mains power up.
C1:Battery connection missing or bad
A1:Check battery's connections
C2:Battery faulty (for example, old)
A2:Replace battery
C3:Battery charging problem
A3:Check wiring to charging device. Check function of charging device
(charging voltage, fuses).
0073
ELEVATOR
BACKUP BAT CAR SUFFICIENT CHARGE *)
In the course of a car backup battery failure, this (informative) error message is
created to indicate that the car backup battery is again in working order.
C1:
A1:No action required
Code General Message