Schlage FE599 - Initial Setup and Door Preparation; Locate Programming Code and Preset User Codes; Check Door Dimensions

1
Locate Programming Code and Preset User Codes
The programming code and the preset user codes are printed on the yellow stickers located on the back of the
keypad and on the installation sheet that came in the box. Write these codes in the space provided on the first page.
2C\,” (60 mm)
OR
2C\v” (60 mm)
2Z\,” (53 mm)
Hole
2
Check Door Dimensions
If your door does not match the dimensions shown, go to www.part2.schlage.com for instructions on how to prepare
your door.