Need help?Do you have a question about the schmersal PROTECT-PSC and is the answer not in the manual?
Introduction to the instruction manual and its content.
Defines frequently used terms and abbreviations in the document.
Details the manual's organization into chapters and page layout.
Describes the PROTECT-PSC as a modular programmable safety field bus controller.
Explains the hardware and software operational principles of the PROTECT-PSC.
Defines the safety functions realized by the PROTECT-PSC system.
Describes the Performance Level (PL) according to ISO 13849-1 for safety functions.
Defines Safety Integrity Level (SIL) requirements according to IEC 61508.
Provides examples for calculating Performance Level and Safety Integrity Level.
Contains critical warnings for safe and correct use of the PROTECT-PSC.
Specifies the intended application and operational guidelines for the PROTECT-PSC.
Provides step-by-step guidance for designing and implementing the system.
Provides an overview of the PROTECT-PSC product range and basic module structure.
Details the channels used by each module in the system.
Lists ID codes and version information for various PROTECT-PSC modules.
Describes the different operating modes (0, 1, 2, 3) of the PROTECT-PSC.
Details the power supply requirements and external units for the PROTECT-PSC.
Describes the PSC-Base module and its role as a backplane bus.
Provides technical data and housing description for CPU modules.
General description and safety functions of input modules.
General description and safety functions of output modules.
Provides technical data and housing description for the PSC-SUB-MON module.
Describes PSC-S-STP-E, PSC-S-STP-LC, PSC-S-STP-ELC modules.
General description for PSC-S-IN-E and PSC-S-IN-LC input modules.
Describes the PSC-S-Relais module, its technical data and terminal designation.
General description for PSC-S-OUT semi-conductor output module.
General description of the operational input module.
General description of the operational output module.
Describes the PSC-NS-IN operational input module.
Describes the PSC-NS-OUT+ operational output module.
Covers ambient conditions, back plane assembly, and module installation.
Provides general wiring information, power supply, and cable laying guidelines.
Illustrates common safety circuitry examples like E-STOP and guard monitoring.
Introduction to operating mode 3 for user program creation.
Outlines the sequence for implementing projects in operating mode 3.
Introduces the PROTECT-PSCsw software for program creation.
Details the functionality of PROTECT-PSCsw with and without password.
Specifies minimum hardware and software requirements for PROTECT-PSCsw.
Provides instructions for installing the PROTECT-PSCsw software.
Explains password protection features for program creation and modification.
Details the procedure for entering or changing the PIN code.
Describes connecting to PROTECT-PSC and transferring programs/data.
Explains the PROTECT-PSCsw user interface components.
Covers setting PROTECT-PSC operating mode and CPU program execution.
Details the process of creating user programs using ladder diagrams.
Provides practical examples of program functions like manual resetting and start level.
Explains how to use libraries and create function blocks in PROTECT-PSCsw.
Describes how to perform LD program checks and logic checks.
Details the procedure for changing user programs via the PC.
Explains how to modify contacts and compare programs.
Covers monitoring inputs, outputs, and memory areas during operation.
Provides options for creating and printing program documentation.
Explains presentation and configuration options within the software.
Describes how to reset the CPU module to its delivery state.
Information on checking and updating the PROTECT-PSCsw version.
Information on the initial state of the CPU module upon delivery.
Guidance for the initial start-up procedure of the controller.
Details error categories, error memory, and specific error messages/codes.
Covers maintenance tasks such as battery replacement and fuse checks.
Provides contact information for technical support and service.
Provides general technical specifications and electromagnetic compatibility data.
Lists relevant industry standards and their designations.
Information regarding the EC Type-Examination certificate.
Presents the EU Declaration of conformity for the PROTECT-PSC.
An alphabetical index for quick reference to topics.
Introduction to the instruction manual and its content.
Defines frequently used terms and abbreviations in the document.
Details the manual's organization into chapters and page layout.
Describes the PROTECT-PSC as a modular programmable safety field bus controller.
Explains the hardware and software operational principles of the PROTECT-PSC.
Defines the safety functions realized by the PROTECT-PSC system.
Describes the Performance Level (PL) according to ISO 13849-1 for safety functions.
Defines Safety Integrity Level (SIL) requirements according to IEC 61508.
Provides examples for calculating Performance Level and Safety Integrity Level.
Contains critical warnings for safe and correct use of the PROTECT-PSC.
Specifies the intended application and operational guidelines for the PROTECT-PSC.
Provides step-by-step guidance for designing and implementing the system.
Provides an overview of the PROTECT-PSC product range and basic module structure.
Details the channels used by each module in the system.
Lists ID codes and version information for various PROTECT-PSC modules.
Describes the different operating modes (0, 1, 2, 3) of the PROTECT-PSC.
Details the power supply requirements and external units for the PROTECT-PSC.
Describes the PSC-Base module and its role as a backplane bus.
Provides technical data and housing description for CPU modules.
General description and safety functions of input modules.
General description and safety functions of output modules.
Provides technical data and housing description for the PSC-SUB-MON module.
Describes PSC-S-STP-E, PSC-S-STP-LC, PSC-S-STP-ELC modules.
General description for PSC-S-IN-E and PSC-S-IN-LC input modules.
Describes the PSC-S-Relais module, its technical data and terminal designation.
General description for PSC-S-OUT semi-conductor output module.
General description of the operational input module.
General description of the operational output module.
Describes the PSC-NS-IN operational input module.
Describes the PSC-NS-OUT+ operational output module.
Covers ambient conditions, back plane assembly, and module installation.
Provides general wiring information, power supply, and cable laying guidelines.
Illustrates common safety circuitry examples like E-STOP and guard monitoring.
Introduction to operating mode 3 for user program creation.
Outlines the sequence for implementing projects in operating mode 3.
Introduces the PROTECT-PSCsw software for program creation.
Details the functionality of PROTECT-PSCsw with and without password.
Specifies minimum hardware and software requirements for PROTECT-PSCsw.
Provides instructions for installing the PROTECT-PSCsw software.
Explains password protection features for program creation and modification.
Details the procedure for entering or changing the PIN code.
Describes connecting to PROTECT-PSC and transferring programs/data.
Explains the PROTECT-PSCsw user interface components.
Covers setting PROTECT-PSC operating mode and CPU program execution.
Details the process of creating user programs using ladder diagrams.
Provides practical examples of program functions like manual resetting and start level.
Explains how to use libraries and create function blocks in PROTECT-PSCsw.
Describes how to perform LD program checks and logic checks.
Details the procedure for changing user programs via the PC.
Explains how to modify contacts and compare programs.
Covers monitoring inputs, outputs, and memory areas during operation.
Provides options for creating and printing program documentation.
Explains presentation and configuration options within the software.
Describes how to reset the CPU module to its delivery state.
Information on checking and updating the PROTECT-PSCsw version.
Information on the initial state of the CPU module upon delivery.
Guidance for the initial start-up procedure of the controller.
Details error categories, error memory, and specific error messages/codes.
Covers maintenance tasks such as battery replacement and fuse checks.
Provides contact information for technical support and service.
Provides general technical specifications and electromagnetic compatibility data.
Lists relevant industry standards and their designations.
Information regarding the EC Type-Examination certificate.
Presents the EU Declaration of conformity for the PROTECT-PSC.
An alphabetical index for quick reference to topics.
General| Product name | PROTECT-PSC |
|---|---|
| Category | Control Systems |
| Manufacturer | Schmersal |
| Number of safe outputs | 2 |
| Operating voltage | 24 V DC |
| Safety level | SIL 3, PL e |
| Connection type | Screw terminals |
| Operating temperature | -25°C to +55°C |
| Enclosure rating | IP20 |
| Ambient temperature range | -25°C to +55°C |
| Output type | Semiconductor |
To Next Page