schmersal PROTECT-PSC - System description; Overview

System description
3
Instruction Manual PROTECT-PSC
V 2.6R01 / 04.19
3–1
3 System description
This chapter describes the individual components of the PROTECT-PSC.
3.1 Overview 3–3
3.1.1 Product range 3–3
3.1.2 Basic module structure 3–4
3.2 Channel overview 3–5
3.3 ID code of the modules / Module Version 3–6
3.3.1 ID code of the modules 3–6
3.3.2 New modules version 3–6
3.3.3 Module Version Confirmation 3–7
3.4 PROTECT-PSC operating modes 3–21
3.4.1 Overview 3–21
3.4.2 Operating mode 0 3–21
3.4.3 Operating mode 1 3–21
3.4.4 Operating mode 2 3–21
3.4.5 Operating mode 3 3–21
3.5 Power supply 3–23
3.5.1 General description 3–23
3.5.2 External power supply units 3–23
3.5.3 PSC-Power 3–24
3.5.4 PSC-Booster 3–25
3.6 PSC-Base 3–26
3.6.1 General description 3–26
3.7 PSC-CPU-MON / PSC-CPU-OP-MON 3–27
3.7.1 General description 3–27
3.7.2 Displays 3–30
3.7.3 Operating elements 3–31
3.7.4 Back-up battery 3–35
3.7.5 Voltage monitoring 3–36
3.7.6 Memory areas 3–38
3.8 Input modules 3–41
3.8.1 General description 3–41
3.8.2 Safety functions 3–44
3.9 Output modules 3–45
3.9.1 General description 3–45
3.9.2 Safety functions 3–47
3.10 PSC-SUB-MON 3–48
3.10.1 General description 3–48