27
5 Cleaning
For cleaning the unit do not use any
AGGRESSIVE SOLVENTS
such as trichloroethylene or similar chemicals.
NO WARRANTY OR LIABILITY
shall be accepted for damage resulting from improper cleaning.
The question of finding the right frequency of calibration accuracy verification depends on
several different factors:
Operating time and load of the SCHMIDT tension meter
Tolerance band defined by the customer
Changes to the tolerance band compared to previous calibrations
Therefore, the interval between verifications of calibration must be determined by the user‘s
Quality Assurance Department, based on the user‘s experience.
Assuming normal operating time and load as well as careful handling of the tension meter,
we recommend a verification interval of one year.
6 Verification interval
If you have any questions regarding the instrument or Operating Instructions or their use,
please indicate all the following details which are given on the ID plate:
1) Model
2) Serial number
7 Correspondence
Service address:
To avoid unnecessary follow-up questions, and the resulting loss of time or
possible misunderstandings, please return the instrument with a detailed fault
description to our service department. Please indicate in your order whether you
require an Inspection Certificate 3.1 according to DIN EN 10204.
8 Repairs
HANS SCHMIDT & Co GmbH
Schichtstr. 16
D-84478 Waldkraiburg
Germany
Shipping instructions:
We kindly ask for return free of charge for us, if possible by airmail parcel. All occurring
charges, if any (such as freight, customs clearance, duty etc.), will be billed to customer.
For return from foreign countries, we ask you to include a proforma invoice with a low value
for customs clearance only, e.g. 50 Euro, each and to advise the shipment in advance by
fax or eMail.
To Next Page
Loading...
