SCHOTT Lab 850 - Data Saving and Storage

Lab 850 Operation
31
ba75890e01 11/2009
4.5 Saving
The pH meter has an internal data memory. It can store up to 800
datasets.
A complete dataset consists of:
z Date/time
z Memory location number
z ID number
z Measured value
z Temperature
z Temperature measuring procedure (manual or automatic)
You can transmit measured values (datasets) to the data memory in
two ways:
z Store manually (<STO>)
z Switch on AutoStore (Int.1) (<STO
_>).
4.5.1 Manual storage
You can transmit a measured value to the data memory as follows:
1 Store the measurement dataset with <STO>.
The consecutive number of the next free memory location is
shown on the display.
2 Confirm with <OK>.
The display switches to entering the ID number.
2
9
9
6
pH
4
Store
N
No.