Overview Lab 850
8
ba75890e01 11/2009
1.1 Keypad
In this operating manual, keys are indicated by brackets <..> .
The key symbol (e.g. <OK>) indicates a keystroke in this operating
manual.
<On/Off>:
<On/Off
_>:
Switch meter on / off
Reset calibration values
<MODE>:
<MODE
_>:
Select measured parameter
Open setting menu for calibration and
measurement
<CAL>:
<CAL
_>:
Call up calibration procedure
Display calibration data
<SC>:
<SC
_>:
Activate / deactivate stability control
Set interval for data transmission
<STO>:
<STO
_>:
Store measured value
Set interval for automatic storage in
memory
<RCL>:
<RCL
_>:
Display / transmit measured values and
calibration records
Erase stored measured values
<▲>: Increment values, scroll
<▼>: Decrement values, scroll
<OK>:
<OK
_>:
Confirm entries
Open setting menu for system settings
To Next Page
Loading...
