SCHOTT Lab 850 - Interval for Automatic Storing (Autostore)

Lab 850 Operation
49
ba75890e01 11/2009
4.7.3 Interval for automatic storing (AutoStore)
After setting the interval for automatic storing the current measurement
dataset is stored at the specified interval.
AutoStore
interval
AutoStore interval (Int.1) OFF, 5 s, 10 s, 20 s, 30 s, 1 min, 2 min,
5 min, 10 min, 20 min, 30 min, 60 min
1 Press <STO_> to open the setting for the storage interval.
Int.1, the setting of the storage interval is displayed.
2 Press <▲><▼> to select an interval.
3 Confirm with <OK>.
FrEE, the number of free memory locations is displayed.
4 Confirm with <OK>.
The setting of the storage interval is completed.
The meter switches to the measuring mode.
0
1
1
t
n
I
Auto
Store
Time
0
E
E
r
1
99
F