SCHOTT Lab 850 - Automatic Storage at Intervals (Autostore)

Lab 850 Operation
33
ba75890e01 11/2009
4.5.2 Automatic storage at intervals (AutoStore)
In order to store measured values automatically at certain time
intervals, set the storage interval (Int.1).
Setting the save interval The default setting for the storage interval (Int 1) is OFF.
By this, the AutoStore function is switched off.
To switch the function on, set an interval (5 s, 10 s, 20 s, 30 s, 1 min, 2
min, 5 min, 10 min, 20 min, 30 min, 60 min):
Note
When the AutoStore function is active, the automatic switchoff function
is off.
1 Using <STO_>, call up the setting menu for automatic storing
(Int.1) .
2 Set the required interval with <▲><▼>.
3 Confirm with <OK>.
FrEE, the number of free memory locations is displayed.
0
1
1
t
n
I
Auto
Store
Time
0
E
E
r
1
99
F