Schrack Seconet Integral MAP - Log Printer Management; Activate or Disable Log Printer; Repeating Log Prints

Log printer|Activate/disable log printer
B-HB-0133EN Operating panel Integral MAP|User manual 27
7 Log printer
(Element optional)
7.1 Activate/disable log printer
|Activate/disable log printer
(An authorisation code must be entered for this to be permitted)
1. Pressing the button Other Elements
Q
.
2. Using the scroll buttons E/F to select the entry PRINTER.
3. Confirm with the enter button D.
4. Enter the element number of the printer using the numerical buttons of the keypad
X
.
5. Confirm with the enter button D.
u The current state of the printer will be shown on the display e.g. IDLE.
6. Pressing the button Off
e
turns the printer off. Pressing the button On
d
turns the
printer on.
7.2 Repeat print
|Repeat print
1. Pressing the button Menu
a
opens the menu for additional options.
2. Using the scroll buttons E/F to select the entry REPEAT PRINT.
3. Confirm with the enter button D.
4. Using the scroll buttons E/F to select the log printer for repeating a print from the
list.
5. Confirm with the enter button D.
6. Using the scroll buttons E/F to scroll through the list of available lists
EVENTLOG,TRACELOG, FAULTS, DISABLEMENTS.
7. Confirm with the enter button D.