General
6
04.00 | LGZ | Assembly and Operating Manual | en | 389192
1.1.2 Applicable documents
• General terms of business*
• Catalog data sheet of the purchased product *
• Assembly and operating manuals of the accessories *
The documents marked with an asterisk (*) can be downloaded on
our homepage schunk.com
1.1.3 Variants
This operating manual applies to the following variations:
• LGZ without gripping force maintenance
• LGZ with gripping force maintenance "O.D. gripping" (AS)
• LGZ with gripping force maintenance "I.D. gripping" (IS)
1.2 Warranty
If the product is used as intended, the warranty is valid for 24
months from the ex-works delivery date under the following con-
ditions:
• Observe the specified maintenance and lubrication intervals
• Observe the ambient conditions and operating conditions
Parts touching the workpiece and wear parts are not included in
the warranty.
1.3 Scope of delivery
The scope of delivery includes
• 3-finger centric gripper LGZ in the version ordered
• Assembly and Operating Manual
• Accessory pack
1.4 Accessories
The following accessories that are required for the module must
be ordered separately:
• Sensors
A wide range of accessories is available for this module.
For information about which accessories can be used with the ap-
propriate product version ☞ catalog.
To Next Page
Loading...
