To Next PageTo Next Page
Need help?Do you have a question about the SCHUNK UFG 26 and is the answer not in the manual?
General| Brand | SCHUNK |
|---|---|
| Model | UFG 26 |
| Category | Industrial Equipment |
| Language | English |
Lists components included with the gripper for unpacking. Essential for initial setup verification.
Guidelines for intermediate stocking, focusing on environmental protection and surface integrity.
Highlights key characteristics like broad clamping range, flat design, and versatility of the UFG 26/32.
Lists optional components such as proximity switches, pressure pieces, and custom top jaws.
Details operational parameters including actuation, temperature range, stroke, forces, and timing.
Instructions for mounting the gripper, emphasizing alignment due to lack of fixing bores.
Specifies fastening bores and threads for different UFG models during assembly.
Explains how to connect hoses or use direct connection methods for gripper actuation.
Guidance on using O-rings or blind plugs to seal unused oil feeding points.
Provides crucial notes and warnings regarding the handling and application of proximity switches.
Details electrical specifications, sensing distance, and operational parameters of the switches.
Illustrates the physical dimensions and key features of the proximity switch.
Step-by-step guide for installing and adjusting proximity switches for position detection.
Explains the function of the cylindrical screw and control cam for adjusting the interrogation position.
Essential steps for maintaining proper gripper function, including lubrication and cycle-based service.
Instructions for returning components for repair or exchange to SCHUNK.
Identifies common causes for gripper jaws failing to move, such as hydraulic supply interruption.
Lists reasons for decreased clamping force, including screw issues and dirt ingress.
Addresses specific locations of oil leakage, particularly at the bottom connection points.
Specific diagram and information for the pneumatic version of the UFG 26 gripper.
Specific diagram and information for the pneumatic version of the UFG 32 gripper.
Specifies the product designation, type designation, and ID numbers as per the declaration.
Confirms that the product meets the basic requirements of the EC Machinery Directive 2006/42/EC.
Lists the applied harmonized standards, focusing on machinery safety concepts.
Details regarding manufacturer's commitment to providing technical documents and the person responsible for documentation.
