SCHUNK UFG 26 - Unpacking and Control; Volume of Delivery; Storage Precautions

1. Unpacking and Control
1) Carefully remove the packing without using sharp or peaked objects.
2) Check the gripper on transportation damages and if necessary, inform us immediately.
Volume of Delivery:
- UFG (without top jaws and pressure piece)
- 2 O-Rings Ø 6 x 2 mm
- 3 screws M 8 x 35 DIN EN ISO 4762 (UFG 26)
- 3 screws M 8 x 40 DIN EN ISO 4762 (UFG 32)
NOTE:
For intermediate stocking please note:
- keep dry
- protect the unit against aggressive medias
- avoid strong fluctuations in temperature
- lubrify smooth surfaces
- seal connection bores
Illustration: UFG 26 with pressure
piece and special top jaws.
Page -3-