3. Assembly and Connection
NOTE:
For assembly without hoses, please use two O-rings
out of the little plastic bag to seal the oil feeding.
Close the oil feedings which you won’t use with a
suitable blind plug (M 6, R1/4”).
For direct connection
without hoses
3.2 CONNECTION
"open"
"closed"
2 x M 6 for direct connec-
tion without hoses
2 x R1/4” for connection
with threads
Page -6-
"closed"
"open"
M 6
1.5
Ø 6
Ø 10
Gripper
O-ring
Ø 6 x 2
Adaptor
To Next Page
