SCHUNK ROTA THW plus Series - 13 Translation of the Original Declaration of Incorporation

Translation of the original declaration of incorporation
01.00|ROTA THWplus |en
43
Translation of the original declaration of incorporation
in terms of the Directive 2006/42/EG, Annex II, Part 1.B of the European Parliament and of
the Council on machinery.
Manufacturer/
Distributor
H.-D. SCHUNK GmbH & Co. Spanntechnik KG
Lothringer Str. 23
D-88512 Mengen
We hereby declare that on the date of the declaration the following incomplete machine
complied with all basic safety and health regulations found in the directive 2006/42/EC of
the European Parliament and of the Council on machinery. The declaration is rendered
invalid if modifications are made to the product.
Product designation:
Power-actuated chuck with quick jaw change
THW plus in sizes 165-43, 185-52, 215-66, 260-81, 315-104
ID number
0800600, 0800601, 0800602, 0800610, 0800611, 0800612,
0800613, 0800620, 0800621, 0800622, 0800630, 0800631,
0800632, 0800633, 0800640, 0800641, 0800642
The incomplete machine may not be put into operation until conformity of the machine
into which the incomplete machine is to be installed with the provisions of the Machinery
Directive (2006/42/EC) is confirmed.
Applied harmonized standards, especially:
DIN EN ISO
12100:2011-03
Safety of machinery - General principles for design -
Risk assessment and risk reduction
EN 1550:
1997+A1:2008
Machine-tools safety - Safety requirements for the design and con-
struction of work holding chucks
Other related technical standards and specifications:
DIN ISO
702-1:2010-04
Machine tools - Connecting dimensions of spindle noses and work
holding chucks - Part 1: Conical connection
DIN ISO
702-4:2010-04
Machine tools - Connecting dimensions of spindle noses and work
holding chucks - Part 2: Cylindrical connection
VDI 3106:2004-04
Determination of permissible speed (rpm) of lathe chucks (jaw chucks)
The manufacturer agrees to forward on demand the relevant technical documentation for
the partly completed machinery in electronic form to national authorities.
The relevant technical documentation according to Annex VII, Part B, belonging to the
partly completed machinery, has been created.
Person authorized to compile the technical documentation:
Philipp Schräder, Address: see manufacturer's address
Mengen, January2017
p.p. Philipp Schräder; Head of Engineering Design
13