SEL-2890 Instruction Manual Date Code 20210715
Introduction & Specifications
Applications
1.4
HTTP Files
Use FTP to access the HTTP files in the transceiver. The files are located in folders that
are labeled and associated with the Custom, SEL, and User settings. The following
information should be selected when connecting with an FTP program.
➤ Host Type: Select “automatic detect.” If this doesn't work or is
unavailable, select “UNIX.”
➤ User ID: Enter sel2890. The User ID is fixed and is not settable.
Anonymous login is not permitted.
➤ Password: Enter the Access Level 2 (2AC) password. Note that this
password will change if you change the Access Level 2 password
when modifying settings. The default password is furnished in
Section 3: Settings and Commands.
➤ Port: The FTP port in the SEL-2890 is 21.
NOTE: The SEL-2890 FTP server does not support the PAS V
(passive transfer) command.
Use the automatic or binary selection for the type of file transfer. Listed below is the
FTP file structure for the transceiver.
➤ Custom (Folder)
➢ Images 1–5 in .gif format.
➢ Images 6–9 in .jpg format.
➢ index.htm
➢ app1.zip
➢ app2.zip
➢ logo.jpg
➢ Pages 1–9 in .htm format.
➤ SEL (Folder)
➢ access.htm
➢ alitree.zip
➢ closed.gif
➢ data.htm
➢ file.gif
➢ index.htm
➢ link.gif
➢ logo.htm
➢ logo.jpg
➢ mail.gif
➢ menu.htm
To Next Page
Loading...
