Schweitzer Engineering Laboratories SEL-2890

To Next Page

To Previous Page

Date Code 20210715 SEL-2890 Instruction Manual

Preface

Safety Information

Dangers, Warnings, and Cautions

This manual uses three kinds of hazard statements, defined as follows:

Safety Symbols

The following symbols are often marked on SEL products.

DANGER

Indicates an imminently hazardous situation

that, if not avoided, will result in serious death

or injury.

WARNING

Indicates a potentially hazardous situation

that, if not avoided, could result in death or

serious injury.

CAUTION

Indicates a potentially hazardous situation

that, if not avoided, may result in minor or

moderate injury or equipment damage.

CAUTION

Refer to accompanying documents.

ATTENTION

Se reporter à la documentation.

Earth (ground) Terre

Protective earth (ground) Terre de protection

Direct current Courant continu

Main Page

Table of Contents3
List of Tables5
List of Figures7
Preface9
Section 1: Introduction & Specifications11
Introduction11
Features11
Applications12
Figure 1.1 Example Ethernet Substation Network13
Figure 1.2 SEL Default HTTP (WEB=SEL)15
Figure 1.3 BTCP Tunneling Using Broadcast18
Specifications19
Section 2: Installation21
Introduction21
Installation21
Table 2.1 SEL-2890 EIA-232 Serial Port Pinout21
Figure 2.1 Programming Cable Connection22
Figure 2.2 SEL-C642 Cable Wiring Diagram22
Initial Checkout23
Figure 2.3 Telnet Window25
Section 3: Settings and Commands27
Introduction27
Settings27
Table 3.1 SEL-2890 Settings Summary27
Commands36
Command Summary37
Table 3.2 SEL-2890 Command Summary37
Ethernet Network Operation Settings40
Table 3.3 SEL-2890 Network Configuration Settings40
Table 3.4 GATEWAY Address Setting Examples41
Section 4: Detailed Application Examples43
Introduction43
Job Done Example 143
Figure 4.1 Minimal Email Network Connection43
Job Done Example 144
Figure 4.2 Summary Event Report Email from an SEL Relay44
Figure 4.3 Example Telnet Serial Encapsulation System45
Figure 4.4 Network Parameters Dialog Box47
Figure 4.5 Serial Tunneling Network Connection49
Section 5: Troubleshooting53
Introduction53
SEL-2890 Indicator Leds53
Table 5.1 SEL-2890 LED Indicators53
Figure 5.1 Example SEL-2890 Panel53
Troubleshooting Procedures54
Table 5.2 Troubleshooting Procedures54
Technical Support55
Table A.1 Firmware Revision History57
Appendix A: Firmware and Manual Versions Firmware58
Instruction Manual59
Table A.2 Instruction Manual Revision History59
Appendix B: Firmware Upgrade Instructions63
Introduction63
Important Note Regarding Settings63
Required Equipment63
Upgrade Procedure64
Appendix C: HTML Code67
Table C.2 HTTP Files70
Figure C.2 Example HTML Code71
Appendix D: Alitree Applet73
Introduction73
Tree View Java Applet74
Appendix E: ASCII Reference Table75
Table E.1 ASCII Reference Table75
Appendix F: Open Network Ports81
Index83

Schweitzer Engineering Laboratories SEL-2890 - Preface

Table of Contents

Related product manuals