SEL-2890 Instruction Manual Date Code 20210715
Firmware and Manual Versions
Instruction Manual
A.4
20060927
Various Sections
➤ Added C663 as an optional programming cable to Section 2,
Section 3, Section 5, and Appendix B.
Section 2
➤ Added SET command instructions to Step 4 under Installation.
➤ Removed Network Connections.
Section 3
➤ Added TEL_PROC setting, WEB=OFF setting range, and software
flow control to Table 3.1: SEL-2890 Settings Summary.
➤ Added R_S command summary to Table 3.2: SEL-2890 Command
Summary and R_S.
Section 4
➤ Removed former Job Done Example 3.
Section 5
➤ Updated Table 5.2: Troubleshooting Procedures.
Appendix B
➤ Added Step 5 under Upgrade Procedure.
Appendix C
➤ Moved HTML code information from Section 1: Introduction and
Specifications.
Appendix D
➤ Modified Alitree Applet.
➤ Removed former Appendix D: Nodelist Text File.
20040722
All sections
➤ Modified IP address examples.
Table A.2 Instruction Manual Revision History (Sheet 2 of 4)
Revision
Date
Summary of Revisions
To Next Page
Loading...
