Service Manual
Remote Control Cable/Radio
586
13. Interruptions of Work/End of
Operation
• Fold placing boom back to its transport posi-
tion.
• Set all control elements of the transmitter to
“0”-position.
• Switch off the transmitter power supply with
selector switch 5.
Never use an EMERGENCY SHUT-OFF button for
ordinary shut-off.
If the power supply remains on, the unit continues to
transmit the EMERGENCY SHUT-OFF signal. This
leads to unnecessary discharging of the battery.
• Switch off the power supply of the receiver
with the key switch in the driver’s cab.
• Protect the transmitter against unauthorized
use (lock it away!).
• If required, remove the receiver cable from
socket 1 and plug connector into unwired socket 2.
2
3
4
5
6
1
To Next Page
Loading...