Schwinn 430 - Step 8: Attach Upper Handlebar Arms

ASSEMBLY INSTRUCTIONS
12
Step 6 Install Right and Left leg
Parts:
•RightLeg(RefR)
•LeftLeg(RefS)
Tools:
•SuppliedComboWrench
6-1 AttachtheRightleg(RefS),markedwithan“R”stickerthatcan
beremoved,tothepostontheCrank(RefC1)usingoneM8x20L
hexheadthreadlock(Ref10)oneM8washerlocking(Ref5)and
oneM8washerwide(Ref4).
6-2 RepeattheprocedurefortheLeftLeg(RefR)markedwithan“L”
stickerthatcanberemoved.
6-3 PlaceaRoundCover(RefJ)overtheheadofeachbolt.
Note:MakesurethewheelsontheLegsareproperlyseatedin
theExtrusionAssembies.Ifnot,theylegsmayhavebeen
reversed.
R
S
C1
J
J
10
5
4