1
Schwinn
®
430 and Journey 4.0 Elliptical
Fitness Machine Service Manual
8006854.021518.C
Service Manual
Section Code Section Page Number
1 Important Safety Instructions 2
1 Safety Warning Labels and Serial Number 3
1 Specifications 3
1 Maintenance 4
1 Moving the Machine 5
1 Leveling the Machine 5
1 Troubleshooting 6
1 Console Service Mode 8
1 Maintenance Parts Exploded View 10
1 Replacement Procedure Skill Level 11
Mechanical Procedures 12
2 Adjust the Belt Tension 12
3 Set the Brake Tension 15
Part Replacement 18
4 Brake Assembly 18
5 Console 21
6 Console Mast 23
7 Crank Arms 26
8 Data Cable in the Mast 30
9 Drive Belt and Flywheel Assembly 34
10 Front Stabilizer 37
11 Lift Assembly and Rail Assembly 39
12 Pedals and Legs 44
13 Power Inlet 46
14 Roller Wheel Disc (older models only) 48
15 RPM Sensor (Speed Sensor) 50
16 Servo Motor 52
17 Shrouds 55
18 Static Handlebar and Water Bottle Holder 60
19 Tensioner Assembly (Idler Assembly) 62
20 Upper and Lower Handlebar Arms 64
Table of Contents
Nautilus, Inc., www.NautilusInc.com - Customer Service: North America (800) 605-3369, csnls@nautilus.com | outside U.S. www.nautilusinternational.com | © 2013 Nautilus, Inc. | ® indicates trademarks regis-
tered in the United States. These marks may be registered in other nations or otherwise protected by common law. Schwinn is a trademark licensed to Nautilus, Inc.
8018293.021518.A