Schwinn IC3 - Console Setup and Connection

12
6. Install Batteries in Console
Note:TheconsoleusesAAsizebatteries(SUM3).Makesurethatthebatteriespointinthedirectionofthe+/–indicatorsin
the battery bay.
!
Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc), or rechargeable (Ni-Cd, Ni-MH, etc) batteries.
7. Connect and Attach the Console
NOTICE: Removethepre-installedscrews(*)fromthebackoftheConsolebeforeyouconnectthecable. Do not crimp the
cable.
+
-
X2
10
11
10
X4
#2
*