Storage
Store the
sciREADER CL2
device switched off in a dry and clean place away from chemical fumes and
contamination.
During transportation and before installation the
sciREADER CL2
device must be stored in protective
packaging.
Recommended storage temperature is between 0
∘
C and + 40
∘
C.
Device handling
While handling the device, consider its weight (17 kg). By careful handling you will prevent
injury or property damage caused by dropping the device.
For information the centroid position is shown in the picture (Figure 14).
Figure 14: Depiction of centroid position.
Scienion AG, 2019, Original user manual, sciREADER CL2 23
To Next Page
Loading...