Restoring the parameter values for a single
Riding Mode:
●
From the Interactive Menu, use (1) and
(2) to select the item menu" and press
ENTER (3).
●
Select the "Riding Mode" item and press ENTER
(3).
●
Select the Riding Mode you wish to customise
and press ENTER (3).
●
Select the "Default" item and press ENTER (3).
The message “Wait…” is displayed for a few
seconds followed by the message “Restored”.
Then “Default” disappears from the menu list.
...
Gear
N
Default
DQS
DTC
Back
Fig 101
131
To Next Page
Loading...